BGHYJ - J-10152 (DRI MOLY LUBRICANT)
- MSDS: BGHYJ
- Manufacturer: SHELDAHL CORP (MADE BY SOUTHWEST MOLYBDENUM CO)
- Product Name: J-10152 (DRI MOLY LUBRICANT)
- National Stock Number: 3950-01-049-3049
Product Identification
Product ID:J-10152 (DRI MOLY LUBRICANT)
MSDS Date:01/01/1985
FSC:3950
NIIN:01-049-3049
Kit Part:Y
MSDS Number: BGHYJ
Responsible Party
NORTHFIELD, MN 55057
US
Emergency Phone: NONE
Cage: MO743
Contractor
Cage: 07955
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 65%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOBUTANE (AS PART OF PROPELLANT)
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 12.5%
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 12.5%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
MOLYBDENUM DISULFIDE
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: 10%
OSHA PEL 10 MG/M3 TDUST (MO)
ACGIH TLV: 10 MG/M3 (MO); 8990
Hazards
Effects of Overexposure:DIZZINESS & NAUSEA
First Aid
First Aid:REMOVE TO WELL VENTILATED AREA. APPLY OXYGEN IF NEEDED. WASH
CONTACTED SKIN WITH SOAP & WATER.FLUSH CONTACTED EYES WITH LARGE
AMOUNTS OF WATER.
Fire Fighting
Extinguishing Media:NORMAL METHODS
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE HEAT WILL CAUSE
CANS TO RUPTURE
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL TO ABSORB ANY SPILLS
RESULTING FROM PUNCTURE CONTAINER.
Handling
Handling and Storage Precautions:USE NORMAL PRECAUTIONS FOR PRODUCT
UNDER PRESSURE
Other Precautions:AVOID SPRAYING IN EYES.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED
Ventilation:LOCAL RECOMMENDED. ASSURE ADEQUATE VENTILATION
Protective Gloves:NOT NEEDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
KEY1:J7.
Chemical Properties
HCC:F3
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Hazardous Decomposition Products:PHOSGENE
Disposal
Waste Disposal Methods:NORMAL TRASH DISPOSAL METHODS,HOWEVER, TAKE CARE
NOT TO PUNCTURE CANS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.